Supermicro CSE-813M Intel Six-Core W3680 3.33GHz 24GB RAM 4-Bay 1U ServerModel: CSE-813MBackplane: SAS815TQ rev:1.00Motherboard: X8STi-F rev:1.1
In Good Condition,Full Working OrderTested2 Years Warranty4 x 3.5” hot-plug hard drive caddies and screws IncludedIncluded

• 1 xSupermicro CSE-813M 4x 3.5" Bay 1U Server with:
• Processor: Intel Xeon Six-Core W3680 3.33GHz Processor
• Memory: 6 x 4GB DDR3 RAM
• 4 x 3.5" SAS/SATA Hard Drive Bays With4 x 3.5” hot-plug hard drive caddies and screws
• Backplane: SAS815TQ rev: 1.00
• Motherboard: X8STI-F rev: 1.1
• 1 x 280W PSU - PWS-281-1H

Manufacturers Motherboard Specification:
Product SKUsMBD-X8STi-F -O

• X8STi-F (Standard Retail Pack)

MBD-X8STi-F -B

• X8STi-F (Bulk Pack)

Physical StatsForm Factor

• ATX

Dimensions

• 12" x 9.6" (30.5cm x 24.4cm)

Processor/CacheCPU

• LGA 1366 Socket
• Intel® Core™ i7-980X, i7-975 and i7-965Extreme Edition
• Intel® Core™ i7series
• Intel® Xeon® 5600/5500series
• Intel® Xeon® 3600/3500series

System Bus

• QPI (up to 6.4 GT/s)

System MemoryMemory Capacity

• Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
• Three Channel memory bus
• 6 DIMM sockets

Memory Type

• 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 256MB, 512MB, 1GB, 2GB, 4GB

Memory Voltage

• 1.5 V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board DevicesChipset

• Intel® X58 Express chipset
• ICH10R

SATA

• Intel ICH10R SATA (3.0Gbps) Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

Network Controllers

• 2x Intel® 82574L Gigabit Ethernet Controllers
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

VGA

• Matrox G200eW 16 MB DDR2

Super I/O

• Winbond 83627DHG chip

Clock Generator

• CK505

Input / OutputSerial ATA

• 6 SATA ports
• 6 SATA hard drives supported

Floppy

• 1 Floppy controller; 1.44 MB

LAN

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2x USB rear ports
• 2x USB on-board
• 2x USB internal header(4 ports)
• Total 8 USB 2.0 Compliant

VGA

• 1x VGA port

Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 1x Fast UART 16550 serial port
• 1x internal header

I/O Panel
• Please see this board'sI/O PanelOS Compatibility
• Please see ourOS Compatibility ChartChassis ( Optimized for X8STi-F )1U Chassis

• CSE-811TQ-280
• To support the new generation Intel® Xeon® processor-based motherboards, aRevision Kchassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion SlotsPCI-Express

• 1 (x16) PCI-e 2.0 slot
• 1 (x8) PCI-e slot

PCI

• 1x 32-bit PCI slot

System BIOSBIOS Type

• 32Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• DMI 2.3
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3

ManagementSoftware

• IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
• SuperDoctor® III
• Watch Dog
• NMI

Power Configurations

• ACPI / ACPM Power Management
• Main Switch Override Mechanism
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• Power-on mode for AC power recovery
• Internal/External modem ring-on

PC Health MonitoringVoltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN

• Total of six fan headers supporting up to 6 fans
• Six 4-pin fan headers
• 6x fans with tachometer status monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• FC temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

LED

• CPU / System Overheat LED
• +5V Standby alert LED

Other Features

• Chassis intrusion detection
• Chassis intrusion header

Operating EnvironmentEnvironmental Spec.

• Operating Temperature: 10°to 35°C (50°to 95°F)
• Non-operating Temperature: -40°to 70°C (-40°to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED£120 excluding VAT
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
SA 301601 301602 301613 301622