Supermicro SYS-1028R-WC1RT Barebones Server NEW, IN STOCK, 5 Year Warranty
SpecificationsProduct SKUsSYS-1028R-WC1RT

• SuperServer 1028R-WC1RT (Black)

Motherboard
Super X10DRW-iTProcessor/CacheCPU

• Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
  
• Dual Socket R3 (LGA 2011)

Cores / Cache

• Up to22 Cores†/ Up to55MB†Cache

System Bus

• QPI up to 9.6 GT/s

Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System MemoryMemory Capacity

• 16x 288-pin DDR4 DIMM slots
• Up to 2TB†ECC 3DS LRDIMM/RDIMM

Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

• RDIMM: 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors

On-Board DevicesChipset

• Intel® C612 chipset

SATA

• SATA3 via Intel® C610; RAID 0, 1

SAS

• SAS3 (12Gbps) via Broadcom 3108
• RAID 0, 1, 5, 6, 10, 50, 60 support
• 2GB DDR3 Cache

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Controllers

• Intel® X540 Dual Port 10GBase-T
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)

Graphics

• ASPEED AST2400 BMC

Input / OutputSerial ATA

• 2x SATA3 (6Gbps) ports

SAS

• 8x SAS3 (12Gbps) ports

LAN

• 2x RJ45 10GBase-T ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 6x USB 3.0 ports (4 rear + 2 via header)

VGA

• 1x VGA port

Serial Port / Header

• 1x Fast UART 16550 header

DOM

• 2x SuperDOM(Disk on Module) ports

PC Health MonitoringVoltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator

FAN

• 6x 4-pin fan headers (up to 6 fans)
• 6x fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI

LED

• System Information LED
• Suspend static indicator LED
• UID/Remote UID

Other Features

• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS

ChassisForm Factor

• 1U Rackmount

Model

• 17.2" (437mm)

Height

• 1.7" (43mm)

Depth

• 23.5" (597mm)

Weight

• Net Weight: 25.5 lbs (11.6 kg)
• Gross Weight: 39 lbs (17.7 kg)

Available Colors

• Black

Front PanelButtons

• Power On/Off button
• UID button

LEDs

• Power status LED
• HDD activity LED
• 2x Network activity LEDs
• Universal Information (UID) LED

Expansion SlotsPCI-Express

• 2 PCI-E 3.0 x16 full-height, Half-length slots

Drive BaysHot-swap

• 10 Hot-swap 2.5" SAS/SATA HDD trays (Default 8 SAS3, 2 SATA3)

BackplaneSAS/SATA HDD Backplane
Optional 2x 2.5" NVMe drivesSystem CoolingFans

• 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control

AC/DC240V Input Redundant Power Supply700W/750W Redundant Power Supplies with PMBusTotal Output Power

• (W x H x L)
  • 54.5 x 40.25 x 320 mm
  Input
  • 100 - 140Vac / 8 - 6A / 50-60Hz
  • 200 - 240Vac / 4.5 - 3.8A / 50-60Hz
  • 200 - 240Vdc / 4.5 - 3.8A (CCC Only)
  +12V
  • Max: 58A / Min: 0.5A (100 - 140Vac)
  • Max: 62A / Min: 0.5A (200 - 240Vac)
  • Max: 62A / Min: 0.5A (200 - 240Vdc)
    (CB/CCC Only)
  +5V sb
  • Max: 3A / Min: 0A
  Output Type
  • Gold Finger Connector Mating with Molex 45984-4343
  Certification
  Platinum Certified
  [Test Report]System BIOSBIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
  BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS resuce hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  ManagementSoftware
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • IPMI 2.0
  • Intel Node Manager
  Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
  Operating Environment / ComplianceRoHS
  
  • RoHS Compliant
  Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
  Parts ListParts List - (Items Included)
  Part Number
  Qty
  Description
  Motherboard / ChassisMBD-X10DRW-iT
  CSE-116AC2-R706WB1
  1Super X10DRW-iT Motherboard
  1U ChassisAdd-on Card / ModuleAOM-S3108M-H81LSI3108, SAS-3/Gen-3 1U SAS3 12Gbps Hybrid backplane, support up to 8x 2.5-inch SAS3/SATA3 HDD/SSD and 2x SAS3/SATA3/NVMe Storage DevicesCable 1CBL-SAST-05501MINI SAS HD,12G,INT,25CM,30AWGCable 3CBL-SAST-05681MINI SAS HD,12G,INT,35CM,30AWGCable 4CBL-CDAT-06621CBL,SGPIO,2X4F TO 2X4F,P2.54,ROUND CABLE,61.5CM,28AWGLabelLBL-01081CAUTION LABEL FOR REDUNDANT PWR SYSTEMSManualMNL-1637-QRG11028R-WC1R(T) QRG,HFRiser CardRSC-R1UW-2E1611U LHS WIO Riser card with two PCI-E x16 slotsHeatsink / RetentionSNK-P0047PSC11U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MBHeatsink / RetentionSNK-P0057PS11U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MBPower SupplyPWS-706P-1R21U 750W redundant power width 4 Pin PWM FanRail SetMCP-290-00063-0N1 setRail set, quick/quick, default for 1U 17.2"W for SC113/SC116,RoHS/REACH
  Vector Data builds rugged, carrier-Grade and custom systems. We use to sell our OEM surplus and to reach customers across the globe.
  On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
  Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.