Supermicro SYS-1028TP-DC0FR Barebones Server NEW IN STOCK, 5 Year Warranty
SpecificationsProduct SKUsSYS-1028TP-DC0FR
- SuperServer 1028TP-DC0FR (Black)
Motherboard (Two per System)
Super X10DRT-PIBFProcessor/Cache (per Node)CPU
- Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache
- Up to22 Cores†/ Up to55MB†Cache
System Bus
Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory (per Node)Memory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB†ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage
Error Detection
- Corrects single-bit errors
On-Board Devices (per Node)Chipset
Infiniband
- Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller
SAS
- Broadcom 3008 SAS3 (12Gbps) controller;
SW RAID 0, 1, 10 support
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Input / Output (per Node)SAS
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
Infiniband
- 1x external QSFP Infiniband connector
USB
VGA
Serial Port / Header
- 1x Fast UART 16550 port / 1 Header (internal)
Others
- 1xSATADOMsupport on the motherboard
ChassisForm Factor
Model
Height
Depth
Weight
- Gross Weight: 48.1 lbs (21.9 kg)
- Net Weight: 33.5 lbs (15.2 kg)
Package (HxWxD)
- 8" (203mm) x 29.6" (752mm) x 38.4" (975mm)
Available Colors
Front PanelButtons
- Power On/Off button
- UID button/LED
LEDs
- Power status LED
- Network activity LED
- Universal Information (UID) LED
Expansion Slots (per Node)PCI-Express
- 1x PCI-E 3.0 x16 Low-profile slot
0 Slot
Drive Bays (per Node)Hot-swap
- 4x 2.5" Hot-swap SAS3 drive bays
System Cooling (per Node)Fans
- 3x heavy duty counter rotating fans with air shroud and optimal fan speed control
PowerStick Power Supply1000W 1U Redundant Power Supplies with PMBusTotal Output Power
- 800W: 100 – 127Vac
- 1000W: 200 – 240Vac
Dimension
(W x H x L)
Input
- 100-127Vac / 9-7.5A / 50-60Hz
- 200-240Vac / 6-5A / 50-60Hz
+12V
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
+5Vsb
Output Type
- Gold Finger Connector (16 Power Pin, 14 Signal Pin)
Certification Titanium Level
[Test Report]System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10DRT-PIBF
CSE-809H-R1K052
1Super X10DRT-PIBF Motherboards
1U ChassisBackplaneBPN-ADP-S3008L-L6IP2LSI 3008, SAS 12Gbs (X6 port inside)BackplaneBPN-SAS3-809H18-port 1U TwinPro SAS3 12Gbps (4 drives per node) backplane, support up to 8x 2.5-inch SAS3/SATA3 HDD/SSDCable C14 TO C13,4FT,17AWGLabelLBL-01081CAUTION LABEL FOR REDUNDANT PWR ,QRGRiser CardRSC-R1UTP-E16R21U RHS TwinPro Riser card with one PCI-E x16 slotHeatsink / RetentionSNK-P0057PS21U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MBHeatsink / RetentionSNK-P0047PSM21U Passive Front CPU Heat Sink w/ a Middle Air Channel for X9, X10 2U Twin^2+ and Twin Pro^2 Series ServersPower SupplyPWS-1K05A-1R21000W Redundant Titanium Level (96%) Power Supplies
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.
![Buy Now Buy Now](buy.gif)