Supermicro SYS-5018D-MF 1U Short-Depth Barebones Server
These are leftover brand new from an OEM project. These come with a 5 Year Warranty from Vector Data.
SpecificationsProduct SKUsSYS-5018D-MF
- SuperServer 5018D-MF (Black)
Motherboard
Super X10SLL-FProcessor/CacheCPU
- Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
System MemoryMemory Capacity
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 with 10/100/1000Mbps
Network Controllers
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Input / OutputSerial ATA
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
- SATA DOM Power Connector
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 6x USB 2.0 ports (4 rear, 2 via header)
- 2x USB 3.0 ports (1 Type-A, 1 via header)
VGA
Serial Port / Header
- 1x Fast UART 16550 serial port
- 1x internal header
PC Health MonitoringVoltage
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED
- CPU / System Overheat LED
- +5V Standby alert LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
ChassisForm Factor
Model
Width
Depth
Weight
- Gross Weight: 16.2 lbs (7.4 kg)
- Net Weight: 12 lbs (5.3 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
Expansion SlotsPCI-Express
- 1x PCI-E 3.0 x8 (in x16) Full-height slot
Drive BaysInternal HDDs
- 2x 3.5" internal SATA3/2 HDD bays w/ RAID (2.5" optional)
Peripheral DrivesDVD-ROM
- Slim DVD-ROM Drive (optional)
System CoolingFans
Power Supply350W AC power supply w/ PFCAC Voltage
- 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V
+5V standby
+12V
+3.3V
Certification
Gold Certified
[Test Report]System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
ManagementSoftware
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
Power Configurations
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
Operating Environment / ComplianceRoHS
- RoHS2 (2011/65/EU) Compliant
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10SLL-F
CSE-512F-350B1
1Super X10SLL-F Motherboard
1U ChassisAir UP X9SRE/I, X9 Mylar Air Shroud, 12"x9.6" MBCable QRGRiser CardRSC-RR1U-E161RSC-RR1U-E16 with PIC-E x16 outputHeatsink / RetentionSNK-P0046P11U PASSIVE CPU HS FOR INTEL LGA1156Power SupplyPWS-351-1H11U 350W MULTI OUTPUT 80PLUS GOLD PWS
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.
![Buy Now Buy Now](buy.gif)