Our M.2 PCIe NVMe duplicators are completely standalone units that can clone or sanitize a number of different media types in a single touch of a button. These high-speed, high-performance SSD copiers are the perfect solution for business, education, and government entities (military, law enforcement, etc.) where copying and erasing device data needs to be accomplished with precision and minimal time.

* Duplication speed will vary depending on read/write transfer rates of master (source) and target (blank) hard drives.

FLEXIBLE CROSS INTERFACE DUPLICATION

Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:

• M.2 (SATA) to M.2 (NVMe)
• M.2 (NVMe) to HDD/SSD (SATA)
• HDD/SSD (SATA) to M.2 (NVMe)
• HDD/SSD (SATA) to HDD/SSD (SATA)

SUPPORTED DEVICES

• NVMe M.2
• SATA M.2
• SATA 3.5" HDD
• SATA 2.5" HDD
• SATA 2.5" SSD

NVME SIZE COMPATIBILITY

Compatible with all sizes of:

• NVME M.2 SSD (Types 2230, 2242, 2260, 2280, 22110)
• PCIe SSD (full and low profiles)

INTELLIGENT DUPLICATION (COPY MODES) System and Files (Quick Copy Mode)

Copies only the data area and skips empty space, reducing the copy duration time.

All Partitions

Can be set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.

Whole Media

Copies from the initial sector to the end, bit-by-bit. There are no format limitations in this mode. Supports all systems and proprietary formats, along with various brands.

Percentage Copy

Set a selected percentage of source/master capacity to copy.

SANITIZATION METHODS (ERASE MODES) Quick Erase

Erases the device's index table, and only takes a few seconds to complete.

Full Erase

Erases the entire device.

DoD Erase

Complies with the erasure standards of the U.S. Department of Defense (DoD) 5220.22-M.

Secure Erase

Complies with standards of the National Institute of Standards and Technology (NIST) 800-88.

COMPARE FUNCTION + CRC CHECKSUM

Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors in order to ensure accuracy of copied data.
After each duplication session, the user simply checks whether the CRC value displayed on the LCD screen is identical.

OVERVIEWEASY OPERATIONSMART LED INDICATORSPRODUCT FEATURES

Features
Descriptions
Operation Type

• Stand-alone, FPGA-based design (no PC required)

Controller Design

• Embedded controller is designed to support capacities over 18TB+.
• Constant improvement supports latest market-available devices.

Devices Supported

• Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
• M.2 (SATA) to M.2 (NVMe)
• M.2 (NVMe) to HDD/SSD (SATA)
• HDD/SSD (SATA) to M.2 (NVMe)
• HDD/SSD (SATA) to HDD/SSD (SATA)
  

Hot Swap Supported

• Supports hot swapping of devices.

Bandwidth Performance

• Peak transfer speeds up to 24GB/min. (400MB/sec.)
• Actual performance is dependent on media transfer speeds.
• Dedicated bandwidth enables high-volume replications without speed degradation.

Read-Only Or Eraseable Source Port

• Built-in feature. Enables/disables source media to be erased/sanitized during erase process.

Modular Port Design

• Replace ports easily to reduce downtime and for cost-effective long-term usage.

PRODUCT FUNCTIONS

Features
Descriptions
Copy Modes

• System and Files (Quick Copy Mode):
  Copies data and skips empty space. Only supports Windows, Mac, and Linux.
• All Partitions:
  Set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
• Whole Media:
  Copies from the initial sector to the end, bit-by-bit. No format limitations. Supports all systems and proprietary formats, along with various brands.
• Percentage Copy:
  Set a selected percentage of source/master capacity to copy.

Compare (Verification)

• Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors and ensure accuracy of copied data from source device to target device(s).

Sanitization Modes

• Quick Erase:
  Erases device index table.
• Full Erase:
  Erases entire device(s), in compliance with the NIST 800-88 standard.
• DoD 3-Pass:
  Erases entire device(s), in compliance with the DoD 5220.22-M standard.
• DoD 3-Pass + Compare:
  Erases entire device(s) and verifies complete erasure, in compliance with the DoD 5220.22-M standard.
  
• DoD 7-Pass:
  Erases entire device(s) 7 times, in compliance with the DoD 5220.22-M standard.
• Secure Erase:
  Erases non-loadable areas, in compliance with the NIST 800-88 standard.
• Enhanced Secure Erase:
  Erases devices that support this feature.
  

Skip Bad Sectors

• Set number of bad sectors to skip during COMPATIBILITIES
  
  Compatibilities
  Descriptions
  Compatible Devices
  
  • NGFF (M.2): 2230, 2242, 2260, 2280, 3030, 3042, 3060, and 3080.
  • Supports B+M Key or M Key only
  • SATA HDD/SSD
    
  Supported Formats
  
  • Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
  • Whole Device Copy Function: All Formats, including proprietary formats.
  • GPT, MBR, and Advanced Formats.
  Supported O/S
  
  • All (Windows, Mac, Linux, and other proprietary systems).
  
  PRODUCT SPECIFICATIONS
  
  Specifications
  Descriptions
  LCD Display
  
  • 2 x 20 Backlit Monochrome LCD Display
  LEDs
  
  • 3 LED Indicators per Port:
  • Yellow (Power), Green (Pass), and Red (Fail)
  Control Panel
  
  • 4 Push Buttons (▲, ▼, OK, ESC)
  Power Requirements
  
  • 12V 5A Power Adapter
  Operational Temperature
  
  • 5°C ~ 45°C (41°F ~ 113°F)
  Non-operational Temperature
  
  • -20°C ~ 85°C (-4°F ~ 20% ~ 80%, non-condensing
  • Non-operating: 5% ~ 95%, non-condensing
  Packaging Dimensions (L×W×H)
  
  • 11 in. x 9 in. x 3 in.
  Product Weight
  
  • 3.31 CE, RoHS, and REACH
  
  

  * Specifications are subject to change without notice.

  Important Notice

  All duplicators are brand new (unless otherwise stated). All brand new duplicators come standard with 3 year labor and 1 year parts warranty with lifetime technical support.All DVD duplicatorsDO NOTburn copy copy-protected DVD and CD discs, such as movies rented from DVD rental stores.Buyer must agree to our return policyBEFOREpurchase. Please read carefully and inquire with questions before offerding/buying.Any questions or concerns can be addressed by message.

  Store Policy

  Usual processing time after receiving customer order is 1 business day. Most orders placed on normal business days ship out that same business day, if not, the very next business day.

  
  

  Free shippingonlyapplies to orders shipped within the continental United States. Additional shipping fees will be required for orders sent to Hawaii, Alaska, military (APO/FPO) addresses and US territories (i.e. Puerto Rico, US Virgin Islands, etc.). Please contact us by message for shipping costs to these locations.

  
  

  Shipping and payment terms differ for international buyers. Please contact us by message for shipping cost and terms of payment. Please notethat international shipments do not include import duties, taxes, destination fees or unknown shipper security fees.

  Returns & Warranty

  Returns for refunds and exchanges are accepted within 30 calendar days from the invoice date.

  No returns will be accepted without an RMA (Return Merchandise Authorization) number. To receive an RMA number, please contact us by message.

  Non-defective returns will be subject to a restocking fee of up to 30% from item purchase price, excluding any shipping and handles charges.

  Shipping and handling charges for returns are non-refundable.

  
  

  For further information regarding returns, please check outour detailed return policy page.

  For warranty information regarding products, please check outour warranty page.

  
  © Copyrights 2022 SySTOR. All Rights Reserved.