TOSHIBA MG06ACA600E 6TB SATA ENTERPRISE HARD DRIVE - FOR PARTS OR NOT WORKINGREAD THIS FIRST
This drive does not work. It spins up and makes a repeated chugging noise, but it never becomes ready for use. The 6TB capacity is the model's rated capacity from the label, not verified usable storage. The cause of the failure is unknown and no component is guaranteed usable.WHAT WAS TRIED
In a USB enclosure the drive reported a medium or hardware error and could not be identified. Removed from the enclosure and connected directly to a SATA port, the controller waited for it and then gave up; the drive never answered. Because it could never be identified, there are no SMART readings, power-on hours or read/write tests.FROM THE LABEL
Model: MG06ACA600E
Part number: HDEPV13GEA51
Serial 19M0A0DGFKTE
Firmware: 0104
Date: 2019-01-24
Interface: SATA 6Gb/s, 3.5 inch, 7200 rpm enterprise driveDATA
The drive could not be wiped. Prior-owner data may remain. A drive that will not become ready is not proof that data cannot be recovered. No secure erase or sanitization is claimed.WHAT YOU GET
One bare 3.5-inch hard drive, the serial above. No enclosure, caddy, screws or cables.SOLD AS-IS FOR PARTS
No warranty or returns. For parts, repair or data-recovery practice only. Ask questions before buying.