Tripp Lite 5/5.8kW Single-Phase Switched PDU with LX Platform Interface, 208/240V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA - power distribution unit - 5.8 kW - TAA Compliant
Tech overviewTripp Lite 5/5.8kW Single-Phase Switched PDU with LX Platform Interface, 208/240V Outlets (20 C13 & 4 C19), L6-30P, 0U, TAA - Power distribution unit (rack-mountable) - 30 A - AC 200/208/240 V - 5.8 kW - 1-phase - Ethernet 10/100 - input: NEMA L6-30 - output connectors: 24 (IEC 60320 C13, IEC 60320 C19) - 0U - 19" - 10 ft cord - TAA Compliant
The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19). LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.
Distributes, Monitors and Manages Single-Phase Power with No Java RequiredTripp Lite's PDUMV30HVNETLX 5/5.8 kW Single-Phase Switched PDU is an efficient, cost-effective power distribution solution with remote monitoring and control capabilities. Each of its 24 switched outlets (20 C13 and 4 C19) can be turned on, turned off, rebooted or locked via Web interface, and you can monitor each outlet’s power consumption both remotely and via the unit’s ammeter. Designed for users who prefer a Java-free interface, this advanced PDU uses 208/240V single-phase input to distribute 200-240V single-phase output to two separately breakered 20A load banks. It’s recommended for any IT or industrial application but especially those requiring individual outlet control, regular load shedding and remote monitoring of critical components. Its 10 ft. cord with locking L6-30P plug connects to a compatible power source, generator or UPS.Provides Advanced Network Monitoring and Control CapabilitiesFeaturing a built-in, Java-free, HTML5-based LX Platform interface, the PDUMV30HVNETLX provides complete remote access for power monitoring, configuration, control and email notifications via a secure network or Web browser. When used with an optional ENVIROSENSE environmental sensor (sold separately), it can also perform temperature/humidity and dry contact monitoring, providing IT personnel with enhanced oversight of facility power and environmental conditions. The PDUMV30HVNETLX supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts can be configured to warn against potential overload, power loss and downtime. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. DHCP/Manual configuration support provides the ability to have network settings automatically assigned or manually assigned via a permanent IP address.Supports Individual Outlet Current Monitoring and Remote Outlet ControlThe PDUMV30HVNETLX offers the ability to turn on, turn off, recycle, or lock out power to any of its 24 outlets as well as locally and remotely monitor each outlet’s output power consumption with 1% billing grade accuracy. This allows you to more efficiently manage network power consumption and properly balance loads, both remotely and on site. So if equipment needs to be rebooted on a Sunday—no problem! Simply log on from wherever you are and take care of business remotely.Supports Real-Time Load and Power Status MonitoringThe PDUMV30HVNETLX is equipped with a digital ammeter that allows you to monitor the PDU’s total load in real time. This meter helps ensure the PDU is used at maximum capacity with no danger of overload..
Reduces the Cost of Data Center MaintenanceAdvanced remote control capabilities lower the PDUMV30HVNETLX’s total cost of ownership by reducing the frequency of on-site visits.Integrates Easily Into Your Existing InfrastructureThis PDU is configurable with included hardware for 0U (vertical) installation in the cable management area of most rack enclosures. It also supports toolless button-mount installation. Vertical 0U installation frees up space in the rack, promoting efficient airflow, and included cord retention brackets reduce cable clutter. An included PDUMVROTATEBRKT kit allows the PDU to be mounted with rear-facing outlets for improved airflow and equipment access. Included plug-lock inserts prevent cables from becoming accidentally disconnected from their outlets.Why Choose Tripp Lite?Founded in 1922 in Chicago, Illinois, TrippLite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, TrippLite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, TrippLite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With 95 years of quality products and service, TrippLite is a brand you can trust.SpecificationsGeneralDevice TypePower distribution unit - rack-mountableHeight (Rack Units)0URack Size19"Cord Length10 ftPower DeviceInput VoltageAC 200/208/240 VFrequency Provided50/60 HzInput Wiring1-phaseFrequency Required50/60 HzInput Connectors1 x power NEMA L6-30Power Output Connectors Details20 x power IEC 60320 C13 12 A ¦ 4 x power IEC 60320 C19 16 AOutput VoltageAC 208/240 V 50/60 HzMax Electric Current30 APower Capacity5.8 kWCircuit ProtectionCircuit breakerNetworkingRemote Management InterfaceEthernet 10/100Remote Management ProtocolSNMP, Telnet, SSHMiscellaneousIncluded AccessoriesCable retention brackets, 24 cable tiesCables IncludedPower cable - integrated - 10 ftRack Mounting KitIncludedFeaturesLCD display, voltage monitoring, current meter, vertical orientation, email alerts supportCompliant StandardsFCC Class A certified, NOM, RoHS, UL 60950-1TAA CompliantYesEnvironmental ParametersHumidity Range Operating5 - 95% (non-condensing)Dimensions & WeightWidth2.2 inDepth2.6 inHeight70 inWeight11.51 lbsDimensions & Weight (Shipping)Shipping Width6 inShipping Depth72.5 inShipping Height4 inShipping Weight16.53 lbs
