Printer head Cm751-80013a For HP8100 HP8600 HP8610 HP8620 HP8625 HP8630 HP8700

69.99 USD

5.99 USD

Printer Head Cm751-80013a For HP8700 HP8100 HP8610 HP8620 HP8630 HP8600 HP8625

79.0 USD

Free shipping

M0H91A Printer Head For HP 952 955 7720 7740 8210 8710 8730 8740 8725 8216 8745

78.88 USD

Free shipping

Printer Head For HP Printer HP953 HP954 HP955 HP7740 HP8710 HP8720 HP8730 HP8740

78.99 USD

Free shipping

Printhead for Zebra 110Xi4 110XiIV Thermal Label Printer 203dpi P1004230

147.77 USD

Free shipping

Print Head for HP Printer HP8610 HP8620 HP8625 HP8630 HP8700 HP8700 251DW 276DW

74.99 USD

Free shipping

PF-03 Printhead (2251B001) for Canon iPF500/510/600/605 and more other models

257.88 USD

Free shipping

PF-10 Print head for Canon class="price">318.29 USD

Free shipping

Thermal Printhead for Zebra ZT230 Barcode Coated Label Printer P1037974-010

135.0 USD

Free shipping

P1079903-010 Thermal Printhead For Zebra ZD410 HC Barcode Label 203DPI Printer

52.99 USD

Free shipping

PF-04 Printhead (3630B001) for Canon iPF650 iPF670 iPF685 iPF750 780 830 850 851

269.99 USD

Free shipping

PF-06 Printhead (2352C001AB) for Canon TX-5300 TM-5200 TM-305 TA-5200 TZ-5300

263.99 USD

Free TO INSTALL: Follow these steps to reset your printer: Turn on the printer (if it's not already on). Wait for the printer to come to a complete standstill before continuing. After turning on the printer, unplug the power cord from the back. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. This printhead kit comes with a printhead that is easy to install and requires no additional tools. Just push the print head into the printer (make sure to disconnect the power before installing)

2.EXCELLENT AFTER-SALES SERVICE: If you have any questions or concerns, please feel free to contact us. We strive to provide a satisfactory answer within 24 hours. We offer a 90-day warranty on our products. Please feel free to contact us if you have any questions before or after your purchase. (Note: The print head contains a small amount of ink for testing, if there is any spillage during transportation, just wipe it with a damp paper towel, it is not a defect)

3.RELIABLE PERFORMANCE: Our printheads are made from premium ABS material to ensure reliable and consistent prints, delivering crisp, vibrant documents and photos. The print head replacement kit has been rigorously tested and is compatible with HP Officejet Pro printers such as the 8100 8600 8610 8620 8650 8630 8625 8635 8640 8700 250DW 251DW 276DW printer.

OEM Code:Cm751-80013a

Suitable for HP: HP8100 HP8600 HP8610 HP8620 HP8625 HP8630 HP8700 HP8700 250DW 251DW 276DW 951 950XL 951XL CR324A/CM751-60126/ and frequently asked questions:
1. When connecting the plug cable, be sure not to bring ink, and make sure it is in good contact with the socket and does not touch the feet. Otherwise, the nozzle will be short-circuited and burned;
2. The steel shaft must also be clean and smooth. You can wipe it with some lubricating oil on a paper towel. Do not add oil directly to the shaft. Excess oil will flow to the nozzle and cause damage;
3. After the machinery and circuit are correct, it is time to check the waterway. First, check whether the amount of water in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and ink suction pump are dirty;
4. There will be air in the newly installed nozzle, so it will not print normally immediately. Only after the air in the nozzle is completely discharged can the lines be produced normally; first, intermittent cleaning can be used (only clean 2 times at a time, and then stop for 30 minutes) Then wash it 2 times)
Excessive cleaning for many times will cause ink accumulation in the cleaning pump, which will not only cause color mixing and leakage, but also waste ink; secondly, you can print more pictures to allow the nozzle to discharge air during work; thirdly, if the machine has been led out To remove the waste ink tube, you can turn off the power first.
Then use a syringe with a rubber tube to pump out the waste ink tube until 3-5ml of ink is extracted. Then turn on the machine and clean it normally with the machine. This is equivalent to artificially forcefully extracting the air from the head. The side effect is that it is easy to cause cleaning. Pump piles ink.

Package Included:
1*Printer head