USB3.1/3.0 To ESATA (6Gb) Adapter JMicron Chipset Port Multiplier, eS3U31

eS3U31 - the latest USB adapter provides the simplest and fastest way for anyone who wants to use external SATA (eSATA) enclosures with the new USB 3.1 host (USB 3.0 compatible). Whether it is a single drive or multiple devices with built-in port multiplier, such as: JMB393, JMB394. JMB575 chip set (patent pending). The eS3U31 is must have device for your new new computer either Mac, Windows or Linux!

• Supports eSATA drive with or without port-multiplier up tp 6Gb (SATA III)
• Supports Hot-Swap & Plug-n-Play Windows ME, and later, Mac OS X, and Linux Kernel 2.6+, Solaris 10
• Supports Software RAID feature in Mac OS X, and Linux
• Support s SATA Port-Multiplier: JBod or Hardware RAID
• Supports SATA III Asynchronous Signal Recovery (Hot Plug) feature (6Gb)
• Complies with USB 3.1, USB3.0 and USB2.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
• Supports USB 3.1 Super-Speed/High-Speed/Full-Speed Operation
• No power, no driver required
• Designed in the USA

This USB3.1 to eSATA adapter allows you to connect ANY eSATA device with or without Port Multiplier (up to 6Gb SATAIII) to a superspeed USB3.1 device! It provides a bandwidth of 10Gb/s, driver-less technology, and fully supports software RAID feature in Linux and Mac OS X.

Our New Adapter function same as the predecessor U3eSATA adapter but Faster and support latest SATA III

Supports Port multiplier
This means with our USB 3.1 adapter, your system can see up to as many drives as you want! Imagine creating a massive 500TB (10TB x 50 drives) volume with a ten (10) port hub and a ten PM (port multiplier) adapters/bridges. Since USB 3.1 or USB 3.0 hub can be cascaded, the question then is how many drives do you want to connect?!?

eSATA (6Gb) to USB 3.1 connectivity
USB3.1 to eSATA 6Gb adapter is the easiest solution for connecting any of the latest eSATA - support SATA I, II and III - devices to the ubiquitous USB3.1 port. Fully support most notebooks and desktops and its compact design is easy to carry and easy to use.

Easy of Use
Does not require drivers or power. It is truly a plug and play device, it takes seconds!

*Does NOT support Sans Digital enclosures.

Part NumbereS3U31
USB 3.1 to eSATA (6Gb SATAIII) adapter (patent pending)PeripheralsAny eSATA enclosure with or without PM technologyOperating SystemANY OS support USB 3.1, 3.0 and 2.0
Linux: Required kernel 3.13xxxx or laterHost InterfaceUSB3.0
Supports USB Super-Speed 10Gb/ 5Gb/s; High-Speed 480Mb/s; Full-Speed 12Mb/s OperationDevice InterfaceeSATA device support PM ware SATA II and SATA III
Support JMB393, JMB394, JMB321, JMB575Operating Temperature0oC to 50oCOperating Humidity5% to 95% non-condensingDimensions.5 x 1.25 x 2.5-inches (H x W x D, approximate)Power RequirementNo external power requiredPackage ContentseS3U31 Adapter - No power required