Dear eBuyer,Please take a look at my other listing it might be of your interest and we can combine multiple items into one single pallet and make a new listing just for you 😊 WE DO OUR BEST TO MAKE SURE OUR LISTINGS ARE ACCURATE, BUT PLEASE CHECK WITH THE MANUFACTURER FOR FULL SPECIFICATIONS AND COMPATIBILITYThe photos are real, in the used items you will be able to see the condition in which it is found, in the open box items you will be able to see the items in their original box but it will probably not be packaged in its original form.

1. Cable Category 6A (Cat 6A): This is a type of Ethernet cable that supports data transfer rates up to 10 gigabits per second (Gbps) at a maximum bandwidth of 500 MHz. Cat 6A cables are commonly used in modern network installations for high-speed data transmission.

2. F/UTP: This stands for Foiled/Unshielded Twisted Pair. It means that each twisted pair of wires within the cable is individually shielded with a layer of foil, but the entire bundle of twisted pairs is not collectively shielded.

3. 4 Pairs: Ethernet cables typically consist of four pairs of twisted wires, each pair used for transmitting and receiving signals.

4. LSZH: This stands for Low Smoke Zero Halogen. LSZH cables are made of materials that produce minimal smoke and no toxic halogen compounds when exposed to high heat or fire. They are often used in environments where fire safety is a concern, such as in buildings with a high density of people.

5. Euroclass Dca: This is a fire classification system used in Europe to classify the fire performance of construction products. Euroclass Dca indicates a moderate fire performance, suitable for use in certain applications with specific fire safety requirements.

6. 500 Meters: This specifies the length of the cable, indicating that it comes in a spool of 500 meters.

7. Yellow: This describes the color of the cable's outer jacket, which can be helpful for identification and organization in networking installations.

So, in summary, the cable you described is a high-speed Ethernet cable (Cat 6A) with individual foil shielding for each twisted pair, suitable for use in environments with fire safety requirements (LSZH, Euroclass Dca) and comes in a 500-meter spool with a yellow outer jacket.

• Wiring - distribution and installation: This cable is intended for various wiring and distribution purposes in different environments.

• Cables and wires - Data cables: It's a data cable, meaning it's designed for data transmission.

• Outer sheath material: Describes the material surrounding the inner wires of the cable. In this case, it's specified as "other."

• Outer sheath color: The outer sheath of the cable is yellow.

• Non-flammable (Martindale ignition test) in accordance with EN 60332-1-2: This means the cable is flame-resistant according to the EN 60332-1-2 standard.

• Low smoke (per EN 61034-2): This cable produces little smoke in case of fire, meeting the EN 61034-2 standard.

• Does not contain halogen (acc. EN50267-2-2): Halogen materials are not present in the cable, which is important for fire safety as required by the EN50267-2-2 standard.

• Approximate outer diameter 7.3mm: This is the approximate thickness of the cable.

• Material Cu (copper): The internal wires of the cable are made of copper, which is a common material for transmitting electrical signals.

• Category class 1: This could mean the cable is suitable for general use.

• Core insulation PE (polyethylene): The internal wires are insulated with polyethylene.

• Core identification color: Each wire has its own color for easy identification.

• Nominal conductor cross-section 0.246300656mm2, conductor diameter 0.56mm: This specifies the size of each individual wire in the cable.

• Number of cores 8: The cable contains 8 wires.

• Operating temperature - variable (min) 0°C, operating temperature - variable (max) 50°C: This specifies the temperature range in which the cable can be safely used when exposed to different environmental conditions.

• Operating temperature - fixed (min) -20°C, operating temperature - fixed (max) 60°C: This specifies the temperature range in which the cable can be safely used in stable conditions.

• Element Pairs: The cables are divided into pairs.

• Screen above element none, Foil screen: This describes the presence of a shield to reduce electromagnetic interference. In this case, a foil shield is used.

• Category 6A (IEC): This indicates that the cable meets the standards for category 6A according to the International Electrotechnical Commission (IEC).

• AWG - cross-section 23: This cable complies with the American Wire Gauge (AWG) standard with a cross-section of 23.

• NPV value 0.65%: This refers to the uncertainty value, possibly to tolerance or something similar, with 0.65% in this case.