Features:
Featuring an integrated antenna, the LTU Lite is a compact, cost-effective subscriber station utilizing the 5 GHz radio band. It functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.
Proprietary LTU TechnologyBased on Ubiquiti’s LTU technology, the LTU Lite is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1+ Gbps with future firmware upgrade) of real TCP/IP throughput and modulation rates of up to 4096QAM (Available with future firmware upgrade).
CPE ModesThe LTU Lite supports both bridged and built-in hardware NAT router modes to suit your specific deployment.
Frequency SplitThe LTU Lite can use different frequencies for TX and RX to avoid interference.
Convenient Mount OptionsThe LTU Lite is designed for quick yet reliable mounting on a pole or on a wall. All necessary mounting hardware is include.
Channel Width FlexibilityChannel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Channel width options include:• 10 MHz• 20 MHz• 30 Mhz• 40 MHz• 50 MHz• Up to 100 MHz (Available with future firmware upgrade)
Auto Power AdjustmentsBy default, the Auto Output Power option allows the LTU Lite to set the output power (EIRP) to the appropriate level.
Signal ControlThe LTU Lite's TX output power is controlled by the AP's target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation.
Convenient ConfigurationTo manage the LTU Lite, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System (UNMS™). Either option lets you manually configure the LTU Lite.Within the LTU Configuration Interface, you can manually configure the LTU Lite or manage it from the AP side using the Find My AP feature. The LTU Lite will automatically scan for APs using the same channel bandwidth. Select the appropriate AP and then use it to configure the LTU Lite.
Specification:
Dimensions
153 x 84 x 39.5 mm
(6.02 x 3.31 x 1.56")
Weight
250 g (8.82 oz)
Networking Interface
(1) 10/100/1000 Ethernet Port
Enclosure
Outdoor UV Stabilized Plastic
Max. Power Consumption
8.5W
Power Supply
24V, 0.5A Gigabit PoE Adapter (Included)
Power Method
Passive PoE 2-Pair (Pairs 4, 5+; 7, 8-)
Supported Voltage Range
22 - 26V
Gain
13 dBi
Mounting
Pole Mount
Wall Mount (Kit Included)
Wind Survivability
200 km/h (125 mph)
Wind Loading
20 N @ 200 km/h
(4.5 lbf @ 125 mph)
ESD/EMP Protection
± 24kV Contact / Air
Operating Temperature
-40 to 60° C (-40 to 140° F)
Operating Humidity
5 to 95% Noncondensing
Certifications
CE, FCC, IC
Operating Frequency (MHz)
Worldwide
4800 - 6200*
US/CA
U-NII-1
5150 - 5250
U-NII-2A
5250 - 5350
U-NII-2C
5470 - 5725
U-NII-3
5725 - 5850
Bluetooth LE Management Radio (MHz)
Worldwide
2400 - 2483.5
![Buy Now Buy Now](buy.gif)