V6 Heat Break All Metal High Temp Titanium and Copper Bi-Metal for V6 Hotend
This product is composed of two metals: titanium and copper. Titanium reduces the upward conduction of heat at the heating position, and uses copper to dissipate heat to accelerate heat conduction. exceeds OEM for E3D thermal fracture.
The inner wall of the tube reaches 0.4um, which is very smooth, so the filament can pass through and reduce clogging.
It is recommended that the return distance of the silk is set between 1-5 mm, and the direct drive printing effect is best.
The size is 1.5mm longer than the original v6 radiator, so it can be directly installed on the v6 radiator to make your V6 perfect.
Can be used for Windproof and Aero.

Color: Silver & Copper
Material: Titanium and CopperChoice of traditional heat break or hex tightening heat break. The hex allows you to better grip the heatbreak and tighten to seal it against the nozzle. We don't recommend doing what the picture shows, first assemble the heater block, nozzle and heat break. After heated and tightened screw on the heatsink and mount your hotend on the 3D printer.

Package Contents:
1x Heatbreak