Ultra-Short ITX SFF GPUWANLI 30HX 17.2cm White ITX Single-Fan Graphics Card16-Ch 6GB GDDR6 | 7921 Thermal Paste | 3 Cooler OptionsWhy Buy This✓17.2cm Ultra-Short ITX — fits A4, SFF and ultra-compact small cases✓16-Ch 6GB GDDR6 — ~90% of GTX 1660 Super gaming performance✓3 Cooler Configurations — different size / thermal performance options✓7921 Thermal Repaste — fully serviced, new pads, stable tempsProduct Overview

A custom modified WANLI 30HX ultra-short ITX graphics card with 17.2cm compact form factor, single-fan cooling and cute character decal design. Built on 1660-series core with 6GB GDDR6 memory and 16-channel full bandwidth, it delivers around 90% of GTX 1660 Super performance, purpose-built for A4, ultra-compact SFF and mini ITX gaming builds.

Each unit is fully disassembled, cleaned and serviced with high-performance 7921 thermal compound and fresh thermal interface pads on both GPU core and VRAM. The all-aluminum heatsink provides solid cooling for its size, with airflow covering both memory chips and MOSFET circuitry for stable operation under load.

It uses an 8-pin PCIe power connector with approximately 130W full load power draw, recommended for use with a quality 400W or higher power supply. This card has no onboard video outputs and requires a CPU with integrated graphics (Intel 4th gen or newer / equivalent AMD) to handle display output.

Key Features

• 17.2cm ultra-short length, fits A4, SFF and most ultra-compact ITX PC cases
• 16-channel full bandwidth, 6GB GDDR6 memory, ~90% of GTX 1660 Super performance
• Three cooler configurations available to balance size and thermal performance
• Fully serviced: deep cleaned, repasted with 7921 thermal grease, new thermal pads on GPU & VRAM
• Single quiet cooling fan, airflow covers VRAM and power MOSFET areas
• White painted housing with original cute character decal set, new replacement IO bracket
• 8-pin PCIe power connector, approx. 130W full load power draw
• Optional protective backplate available for PCB reinforcement
• No onboard video output — requires CPU integrated graphics for display
• Longer 18.8cm full dual-heatpipe version also & ModelWANLI 30HXCore Architecture1660-series coreMemory6GB GDDR6Bandwidth16-Channel full bandwidthStandard LengthApprox. 17.2cmDimensions (L×W×H)Approx. 172 × 110 × 43mm
  0.3mm thinner without backplateCooling TypeSingle fan + aluminum heatsinkThermal Compound7921 high-performance thermal pastePower Connector8-Pin PCIeFull Load PowerApprox. 130WRecommended PSU400W or higher quality ATX PSUVideo OutputNone — requires CPU iGPUExteriorWhite painted housing with cute character decal setThree Cooler ConfigurationsVariantDimensions (L×W×H)Cooler DesignLoad Temp (30°C ambient)Option 1 — Standard Short17.2 × 11 × 4.3cm
  0.3cm thinner without backplateDual heat pipe trimmed
  or large aluminum block
  Two variants shipped randomly~85°C
  FurMark full load, open benchOption 2 — Full Pipe Long18.8 × 12 × 4.3cm
  0.3cm thinner without backplateReversed dual heat pipes
  Only fins trimmed, pipes intact~68°C
  ~15°C cooler than Option 1Option 3 — ZOTAC Short17.5cm compact lengthOriginal single-fan designBalanced size & coolingExpected Gaming Performance
  • Black Myth: Wukong — ~58 FPS average at 2K medium settings, rare stutter
  • Genshin Impact — 55–60 FPS stable at 2K max settings
  • Lu Master Benchmark — ~240,000 points at 1080P, ~200,000 points at 2K
  • Strong entry-level 2K gaming performance, outperforms RX 590
  ⚠ Important — Read Before Buying:
  1. This card has no onboard video ports. Your CPU must have integrated graphics (Intel 4th gen or newer / equivalent AMD) to output display.
  2. This is a DIY modified product. No manufacturer warranty. No returns for compatibility issues or non-quality reasons.
  3. Housing is hand-painted. Minor finish imperfections may exist. Decal-free version is available at lower price.
  4. Modified driver is required for 16-channel operation. Download link and installation guide are provided after purchase.
  5. Factory fan curve is quiet and conservative. Fan speed can be adjusted via third-party software for lower temperatures.Optional UpgradesUpgrade ItemDetailsProtective BackplateReinforced backplate protects PCB from bending8GB Preloaded Driver USB DriveIncludes modified driver pack, system tools and installation guidePackage Includes
  • 1 × WANLI 30HX modified ITX graphics card (selected variant)
  • 1 × Replacement IO shield bracket
  • Modified driver download link + installation guide
  Warranty & ReturnsTestingEvery unit stress tested & temperature checked before dispatchGuaranteeGuaranteed to power on and run 16-channel driver on arrivalReturnsAccepted only for DOA / confirmed functional defectsShipping
  • Dispatched within 1–3 business days after payment cleared
  • Tracking number provided for every order
  • Standard & expedited shipping options at checkout
  • International shipping via Global Shipping Program
  Why Buy From Us
  • Per-unit testing — every card stress tested, temperature checked & verified
  • Fast response — message us anytime, quick reply within 24 hours
  • Transparent listing — clear specifications, honest modification description
  • Technical support — driver guidance & compatibility help included
  FAQ

  Q: Does this card have HDMI / DP video ports?

  A: No. This card has no onboard video outputs. You need a CPU with integrated graphics to output display.

  Q: Will this fit my A4 ITX case?

  A: With 17.2cm length and 11cm width, it fits most A4 and ultra-compact SFF cases. Please measure your clearance first.

  Q: Can I adjust the fan speed?

  A: Yes. Factory curve is quiet and conservative. You can increase fan speed via third-party software to lower temperatures.

  Q: What power supply do I need?

  A: A quality 400W or higher ATX PSU with an 8-pin PCIe power connector is recommended.

  Need the full-pipe version or backplate upgrade? Message us before ordering — we reply fast.