DESCRIPTION
RP2040-Plus, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040RP2040 MCU BoardPlus
a Pico-like MCU board based on Raspberry Pi RP2040
Compatible With Most Of The Raspberry Pi Pico Add-On Modules
Board Specifications
Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by ourRP2040-Plusnow.
As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.
What's different, it features onboard 4MB/16MB (optional) Flash, USB-C connector, recharge header, and higher current DC-DC chip.
Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and4MB/16MB(optional) of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
- Lithium battery recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Pinheader OptionsC/C++, MicroPython Support
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Dual-Core Arm Processor
Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
26 × Multi-Function GPIO Pins
Configurable Pin Function, Allows Flexible Development And Integration
What's On Board
- LED
user LED (not power indicator) - ETA6096
high efficiency Lithium battery recharge manager - MP28164
high efficiency DC-DC buck-boost chip - USB Type-C connector
- BOOT button
press it when resetting to enter download mode - On-board flash memory
4MB: W25Q32JVSSIQ
16MB: W25Q128JVSIQ - RESET button
- RP2040
dual-core processor, up to 133MHz operating frequency - Battery header
MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time - Pinout
compatible with Raspberry Pi Pico - USB test points
connecting to USB interface - BOOT test point
connecting to BOOT button - DEBUG points
Product Show
Outline DimensionsPACKAGE CONTENT
Weight:0.004 kg
RP2040-Plus
- OPTIONSRP2040-Plus x1
RP2040-Plus-M
- OPTIONSRP2040-Plus with pre-soldered header x1