XT-XINTE R3G M.2 M-key PCIe3.0 x4 External Graphics Card Stand Bracket with 6P to Dual 8P Power Cord for ITX STX NUC Motherboard
What is the difference between model R43SG and R43SG-TU?
This product is only for senior DIY enthusiasts to test and use. Incorrect assembly or improper operation may burn the equipment. It is difficult to install and debug the graphics card externally. Ordinary buyers should not place an order for purchase.
In addition to notebooks, this product also supports Intel NUC motherboards, STX motherboards, ITX motherboards, external graphics cards, and M.2 NVMe interface can be used.
Brand: XT-XINTE
Product model: R3G series products
Product name: Graphics card external adapter board extension cable
Wire length: 25cm, 50cm
Graphics card compatibility: support new graphics cards shipped after 2015 (old graphics cards shipped before 2015 are not supported)
Motherboard compatibility: Notebook, ITX/STX motherboard, NUC, only supports M.2 NVMe interface. Does not support M.2 SATA interface, does not support M.2 WiFi interface, does not support M.2 WWAN interface, does not support USB interface.
Power supply description: Support power supply DELL DA-2 series (D220P-01/ADP-220AB) 12V/18A/220W power supply, or standard ATX power supply above 500W, the power supply needs to be prepared by the buyer.
Precautions:
1. Be sure to recognize the direction when plugging in, do not plug it in reverse or off-position to prevent burning of the device. When plugging in, first hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force. It is forofferden to bend or pull within 2cm of the welding place between the two ends of the wire and the circuit board.
2. The signal driving ability of various motherboards and equipment is different. Our test results are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be lost. Buyers with high requirements, please do not Buy.
3. The graphics card or motherboard is an electronic device that will age and oxidize with time. Connecting an extension cord will only make it more unstable. Old devices are not supported. Equipment purchased for more than 3 years. Please do not buy.
4. Unable to provide technical guidance on product installation, driver compatibility, etc.
Product accessories: Hexagonal copper pillars and related screws for fixing the graphics card, and a single 6P to dual 8P graphics card power adapter cable.
The installation of the hexagonal copper column is as follows:
What is the quality of the wire? Is there a shield?
With shielding, advanced EMI shielding conductive polymer is used, new materials are used for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shield of the conductive polymer to prevent the incident or outgoing emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the extender.
What are the options for R3G external power supply?
There are two types, namely DELL power supply and ATX power supply
