Menu
12" Electric Radiator Cooling Fan Assembly Kit,High Performance Cooling Radiator Fan with 12V 80W 800 CFM Mount Kit Universal Black, 2 Pack
- ✅【Radiator Cooling Fan】 12V 80W 12 Inch radiator cooling fan with mount brackets and tie straps kit. Auxiliary equipment for cooling the entire engine compartment, including radiator, A/C system, intercooler, oil system, and transmission
- ✅【Slim & Push/Pull Design】Slim design provides excellent engine bay clearance for engine modification. Direct bolt-on installation and also reversible. It can be used as a puller.
- ✅【High-performing Specification】 Maximum Fan CFM: 800 CFM; Maximum Fan RPM: 2000±10% rpm; Blade Length:12 Inch; Number of Blades: 10 Blades; Blade Type: S-Curved. Overall Diameter:12.44 inch, Overall Thickness:2.36 inch ;Amp Draw: ≤7.5 amp ;Watts:80W.
- ✅【High Quality】Lightweight Plastic Durable Material. Provides optimal flow, reduce pump noise. Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.
- ✅【Universal USE】Radiator cooling fan fit various vehicles and engines. Check the size of your radiator. If you have any questions while using it, please feel free to . We will provide you with satisfactory service.
Product Description
12" Radiator Fan
KIT CONTENTS
- 2 Electric Fan Assembly
- 8 Mounting Rods
- 8 Mounting Clips
- 8 1x1 Foam Pads
- 8 Mounting Feet
- 8 Mounting Spring
12" Electric Radiator Cooling Fan
- The cooling system of your automobile is vital to your engine's overall health and longevity. Without proper cooling, your engine can crack and seize up, which can lead to engine damage.
- To save your energy, time and money, get the superior OEM parts BATONECO offer for your vehicle. Each product is made from high quality materials to maintain proper cooling of your engine and prevent overheating.
- Universal 12v high performance 12" inch electric radiator cooling fan.
- Upgraded 80 watt motor draws 7.5 amps, producing over 800 CFM
- Configured as an air puller by default or reversible to an air pusher.
- Includes complete mounting tie strap kit
- Measures 12.44" x 2.36" thickness at center and 1.4" at edge.
Fan Diameter 7" 10" 12" 16" 16" Thickness 2.64" 2.36" 2.36" 3.27" 3.27" Number of Blades 10 6 10 10 10 Watts 80 80 80 120 120 Amp Draw ≤5 ≤6 ≤7.5 ≤11 ≤11 Maximum Fan RPM 2900±10% 2400±10% 2000±10% 2000±10% 2000±10% Maximum Fan CFM 800 800 800 1000 1000 Fan Diameter 7" 10" 12" 10" 12" 14" Thickness 2.64" 2.36" 2.36" 2.36" 2.36" 2.64" Number of Blades 10 6 10 6 10 8 Watts 80 80 80 80 80 90 Amp Draw ≤5 ≤6 ≤7.5 ≤6 ≤7.5 ≤9.5 Maximum Fan RPM 2900±10% 2400±10% 2000±10% 2400±10% 2000±10% 2000±10% Maximum Fan CFM 800 800 800 800 800 900
This fan assembly is designed for both PUSHER and PULLER applications.To change airflow direction from the factory setting,you MUST follow the directions below or performance will be compromised!
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on vehicles,Always use eye protection (goggles,safety glasses or shield). Park the vehicle in a well lit area,on level ground and apply the parking brake.Only work on a cold vehicle that has bean sitting overnight, failure to do so will result in severe burns and injury.Before starting the vehicle,make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
MOUNTING FAN STEP 1
Take the four mounting feet provided and attach them to the slots on the outside of the fan housing at the desired locations around the perimeter.
Please Note: Tensioner springs included,（not pictured) is optional. For use with mounting rods prior to placing through mounting feet. Tensioner Springs not necessary for mounting fan(s)to radiator.
STEP 2
Position the Fan Assembly against the radiator or air conditioning condenser. Take the four Mounting Rods and carefully install them through the Mounting Feet and then though EITHER the radiator or air conditioning condenser.
Take the four 1 x1 Foam Pads and remove the paper backing.Now installation them(sticky side toward the core) onto the Mounting Rods now protruding through the radiator or air conditioning condenser.
Take the four Mounting Clips supplied and install them onto the Mounting Rods.The mounting Clips can only be used one time,so make sure the Fan Assembly is in the correct location.
Secure Mounting Clips until 1x1 Foam Pads are slightly compressed.Cut off any excess Mounting Rod.
STEP 3
The Electric Fan Assembly can be activated using a Manual Switch or Relay Wiring Kit,For Relay Wiring Kit, Reference the product label on the Electric Fan to determine the Positive(+) and Negative(-) wire colors.
Important:For Puller applications use the referenced wire colors stated.
For Pusher applications the two wires MUST be reversed to change airflow direction.
Item Specification
- Power Connector Type 2-Pin Maximum Rotational Speed 2199 RPM Noise Level 68 dB Color Black Wattage 80 watts Material Plastic Compatible Devices Radiator Item Dimensions LxWxH 12.6 x 11.81 x 5.12 inches Voltage 12 Volts (DC) Cooling Method Air Size 12" Product Dimensions 12.6 x 11.81 x 5.12 inches; 5.73 Pounds Number of Items 2
Dimensions Shipping Returns Additional Info
- Product Dimensions: 11.81 inches x 12.6 inches x 5.12 inches. Weight: 5.73 lb
- Fast shipping is very important for us.
Our standard shipping service is FREE.
Your order will be shipped within 1-3 business days upon full payment received.
Most items are delivered within 3-5 business days, however, please allow 3-10 business days.
We are shipping only to USA.
We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
- We offer a 30 day return policy from checkout winning date.
Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.
Return shipping fees are not refundable.
We reserve the right to decline any returns if the above guidelines are not followed.
- All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.
If you have a problem or question regarding your transaction please contact us before leaving any type of response. We will work with you to resolve any problem you may have.
